Skip to main content

NASA Software Safety Guidebook

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
Correction
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
NASA-GB-8719.13
Version
Baseline
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
NASA HQ, Office, Facility or Division
NASA HQ Office, Facility or Division
OSMA - Office of Safety and Mission Assurance
Technical Discipline Category
8000 - Safety, Quality, Reliability, Maintainability
Endorsed Standard
Endorsement Details
Endorsing NASA Organization
OSMA Endorsed Standard
NASA Core Standard
No
NASA Endorsement Date
NASA Endorsed Standard Status
NASA Endorsed Standard
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
The focus of this document is on analysis, development, and assurance of safety-critical software, including firmware (e.g. software residing in non-volatile memory, such as ROM, EPROM, EEPROM, or flash memory) and programmable logic. This document also discusses issues with contractor-developed software. It provides guidance on how to address creation and assurance of safety-critical software within the overall software development, management, risk management, and assurance activities.
Keywords
software, assurance,
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
Store Standard Document Locally or Remotely
Store the Actual Standard Document on this server
PUBLIC: Upload Publicly Available Standard
Submitting User
Albert T Farrar
Submitting User's Email
albert.t.farrar@nasa.gov

Last modified by:  Fred McMullen
Last modified on:  Sun, 10/15/2023 - 00:32

 


Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”



-No Lessons Learned are associated with this standard.