Skip to main content

FRACTURE CONTROL IMPLEMENTATION HANDBOOK FOR SPACEFLIGHT HARDWARE VOLUME 2: EXAMPLE APPLICATIONS AND ADDITIONAL GUIDELINES

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
Revision
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
NASA-HDBK-5010-VOLUME_2
Version
REVISION A
Volume Number
VOLUME 2
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
NASA HQ, Office, Facility or Division
NASA HQ Office, Facility or Division
OCE - Office of the Chief Engineer
Technical Discipline Category
5000 - Structures/Mechanical Systems, Fluid Dynamics, Thermal, Propulsion, Aerodynamics
Endorsed Standard
Endorsement Details
NASA Core Standard
No
NASA Endorsed Standard Status
Not NASA Endorsed
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
This Handbook provides additional resources such as specific examples, approaches, and checklists for the implementation of fracture control requirements consistent with NASA-STD-5019A. It also provides additional flowcharts and recommendations not addressed in Volume 1 of NASA-HDBK-5010A or NASA-STD-5019A. Some sections do not have content because Volume 1 and NASA-STD-5019A were deemed sufficient.
This revision of the Handbook expands the application beyond payloads and is organized similarly to NASA-STD-5019A requirements with each section in parallel. It contains examples and other supporting materials such as checklists and references to pertinent reference documents.
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
PUBLIC: Upload Publicly Available Standard
2023-12-14-NASA-HDBK-5010-Vol-2-Rev-Final.pdf (41.89 MB)
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.