Skip to main content

Computer-Aided Design (CAD) Standard

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
Correction
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
MSFC-STD-3528
Version
E
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
MSFC - Marshall Space Flight Center
Endorsed Standard
Endorsement Details
NASA Core Standard
No
NASA Endorsed Standard Status
Not NASA Endorsed
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
This document establishes the requirements and procedures for the creation and modification of Pro/ENGINEER® design software Computer-Aided Design (CAD) models and drawings for use at MSFC. The goal is to produce robust models that relate correct dimensional data directly to manufacturing processes. This document identifies modeling methodology so that all design groups produce consistent electronic deliverables within MSFC. Future revisions of this standard will address other CAD tools used at MSFC.
Keywords
Pro/ENGINEER® design software, Computer-Aided Design (CAD) models, modeling methodology,
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
Store Standard Document Locally or Remotely
Store the Actual Standard Document on this server
PUBLIC: Upload Publicly Available Standard
msfc-std-3528.pdf (905.96 KB)
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.