Skip to main content

Flight Cable/Electrical Connector Mating and Demating

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
No
SUNS Notification Type
New Standard
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
GSFC-STD-8013
Version
Baseline
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
GSFC - Goddard Space Flight Center
Endorsed Standard
Endorsement Details
NASA Core Standard
No
NASA Endorsed Standard Status
Not NASA Endorsed
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
This standard prescribes the minimum requirements for the training, records, tool handling, and procedural requirements for the control of electrical connector mating and de-mating operations. This document supplements the workmanship standards referenced in NASA-STD-8739.6 by incorporating training information and identification of personnel authorized to perform mate and de-mate operations.

This is not to be used as a standalone quality document for cable/harness fabrication and testing. It is intended to provide a supplemental, common, safe procedure for the handling of flight electrical connectors in integration and test (I&T). In the event of a conflict between this standard and approved engineering procedures/instructions, the approved engineering procedures/instructions take precedence. In the event of a conflict between this standard and any document referenced in NASA-STD-8739.6, this standard takes precedence.
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
PUBLIC: Upload Publicly Available Standard
GSFC-STD-8013_Approved.pdf (1.37 MB)
Important Standard Dates
Next 5-Year Review Date
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.