Skip to main content

NASA Product Data and Life-Cycle Management (PDLM) Handbook

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
Inactive for New Design
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
NASA-HDBK-0008
Version
Baseline
Change Number
2
Document Date
Change Date
Inactive for New Design Date
Is Active?
INACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
NASA HQ, Office, Facility or Division
NASA HQ Office, Facility or Division
OCE - Office of the Chief Engineer
Technical Discipline Category
0000 - Documentation and Configuration
Endorsed Standard
NASA Endorsed Standard Status
Not NASA Endorsed
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
The purpose of this Handbook is to provide information on product data and life-cycle management (PDLM) and general guidance to adapt the methods needed to implement the requirements in NPR 7120.9, NASA Product Data and Life-Cycle Management (PDLM) for Flight Programs and Projects. This Handbook also addresses elements to consider when developing the PDLM Plan (refer to the template in NPR 7120.9, Appendix D) so that enablers and users of the product are better equipped to recognize lessons learned and avoid pitfalls that might otherwise be experienced.
Keywords
NASA PRODUCT DATA AND LIFE-CYCLE MANAGEMENT (PDLM) HANDBOOK
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
PUBLIC: Upload Publicly Available Standard
2021-12-09-NASA-HDBK-0008-Inactive-New-Design-2021.pdf (1.09 MB)
Important Standard Dates
Next 5-Year Review Date
Revalidated or Reaffirmed Date
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.