Skip to main content

Implementation Requirements for NASA Workmanship Standards

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
Revision
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
NASA-STD-8739.6
Version
B
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
NASA HQ, Office, Facility or Division
NASA HQ Office, Facility or Division
OSMA - Office of Safety and Mission Assurance
Technical Discipline Category
8000 - Safety, Quality, Reliability, Maintainability
Endorsed Standard
Endorsement Details
NASA Endorsement Date
NASA Endorsed Standard Status
NASA Endorsed Standard
Mandatory Standard
NASA Mandatory Standard
NASA Mandatory Standard
Mandatory Standard Requiring Organization
OSMA Mandatory Standard
NASA Mandatory Standard Effective Date
Document Scope
Document Scope
The purpose of this standard is to provide manufacturing, quality, and training requirements for the manufacture of NASA mission hardware and electrostatic discharge (ESD) control which augment requirements found in one or more of the documents listed in Table 1, Workmanship Requirements Documents.
Keywords
workmanship, safety, mission assurance, electronic assembly, electrostatic discharge
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
PUBLIC: Upload Publicly Available Standard
nasa-std-87396b.pdf (828.86 KB)
Important Standard Dates
Next 5-Year Review Date
Office of Primary Responsibility Designee (OPRD)
OPRD First Name
Alvin
OPRD Last Name
Boutte
OPRD Center
GSFC
OPRD Organization Code
3700
OPRD Phone Number
(301) 286-2128
OPRD email address
alvin.j.boutte@nasa.gov
Submitting User
System Admin
Submitting User's Email
standards@msfc.nasa.gov
Submitted Date

Last modified by:  James Wonjin Choi
Last modified on:  Thu, 03/10/2022 - 16:10

 

Application Notes

-No Application Notes are associated with this standard.

Lessons Learned

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.

DRD Summary Page View

-No DRDs are associated with this standard.