Skip to main content

Process for Limiting Orbital Debris

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
Revision
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
NASA-STD-8719.14
Version
C
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
NASA HQ, Office, Facility or Division
NASA HQ Office, Facility or Division
OSMA - Office of Safety and Mission Assurance
Technical Discipline Category
8000 - Safety, Quality, Reliability, Maintainability
Endorsed Standard
Endorsement Details
NASA Endorsement Date
NASA Endorsed Standard Status
NASA Endorsed Standard
Mandatory Standard
NASA Mandatory Standard
NASA Mandatory Standard
Mandatory Standard Requiring Organization
OSMA Mandatory Standard
NASA Mandatory Standard Effective Date
Document Scope
Document Scope
This document serves as a companion to NPR 8715.6 and provides specific technical requirements for limiting orbital debris and methods to comply with the NASA requirements for limiting orbital debris generation. This standard helps ensure that spacecraft and launch vehicles meet acceptable standards for limiting orbital debris generation.
Keywords
Orbital Debris, ODAR, EOMP
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
PUBLIC: Upload Publicly Available Standard
nasa-std-871914c.pdf (884.36 KB)
Important Standard Dates
Next 5-Year Review Date
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.