Skip to main content

ADDITIVE MANUFACTURING REQUIREMENTS FOR EQUIPMENT AND FACILITY CONTROL

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
New Standard
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
NASA-STD-6033
Version
Baseline
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
NASA HQ, Office, Facility or Division
NASA HQ Office, Facility or Division
OCE - Office of the Chief Engineer
Technical Discipline Category
6000 - Materials and Processes, Parts
Endorsed Standard
Endorsement Details
Endorsing NASA Organization
OCE Endorsed Standard
NASA Core Standard
No
NASA Endorsement Date
NASA Endorsed Standard Status
NASA Endorsed Standard
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
This NASA Technical Standard is directed toward equipment and facilities used to produce additive manufacturing (AM) parts for NASA spacecraft systems, including, but not limited to, crewed, non-crewed, robotic, launch vehicle, lander, and spacecraft program/project hardware elements. Requirements in this NASA Technical Standard assume the AM facility is already compliant with all applicable federal, state, or local laws regarding environmental, health, or safety regulations. The requirements in this NASA Technical Standard respond to section 4.5 of NASA-STD-6030, Additive Manufacturing Requirements for Spaceflight Systems.
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
Store Standard Document Locally or Remotely
Store the Actual Standard Document on this server
PUBLIC: Upload Publicly Available Standard
2021-04-21_nasa-std-6033_-_approveddocx.pdf (1.13 MB)
Important Standard Dates
Next 5-Year Review Date
Submitting User
Brenda K Bailey
Submitting User's Email
brenda.k.bailey@nasa.gov
Submitted Date

Last modified by:  Fred McMullen
Last modified on:  Sun, 10/15/2023 - 01:13

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.