Skip to main content

Estimation and Evaluation of Measurement Decision Risk, NASA Measurement Quality Assurance Handbook - ANNEX 4

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
Correction
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
NASA-HDBK-8739.19-4
Version
Baseline
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
NASA HQ, Office, Facility or Division
NASA HQ Office, Facility or Division
OSMA - Office of Safety and Mission Assurance
Technical Discipline Category
8000 - Safety, Quality, Reliability, Maintainability
Endorsed Standard
Endorsement Details
NASA Endorsement Date
NASA Endorsed Standard Status
NASA Endorsed Standard
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
The publication provides principles and methods for the analysis and management of measurement decision risk (MDR) in the calibration of measurement systems and testing of end items. The methods and principles described herein support Agency objectives for assuring measurement accuracy and are applicable for use in all NASA functions for which measurements and decisions based on measurements are involved.
Keywords
metrology calibration measurement risk quality
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
PUBLIC: Upload Publicly Available Standard
nasa-hdbk-873919-4.pdf (2.53 MB)
Important Standard Dates
Revalidated or Reaffirmed Date
Office of Primary Responsibility Designee (OPRD)
OPRD First Name
Jeannette
OPRD Last Name
Plante
OPRD Center
HQ
OPRD Organization Code
OSMA
OPRD Phone Number
(202) 358-4819
OPRD email address
jeannette.f.plante@nasa.gov
Submitting User
System Admin
Submitting User's Email
standards@msfc.nasa.gov
Submitted Date

Last modified by:  James Wonjin Choi
Last modified on:  Thu, 03/10/2022 - 13:27

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.

DRD Related to this Standard

-No DRDs are associated with this standard.