Skip to main content

Creo Model Based Computer-Aided Design Standard

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
Revision
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
SSTD-8070-0140
Version
Baseline-2
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
SSC - Stennis Space Center
Endorsed Standard
Endorsement Details
NASA Core Standard
No
NASA Endorsed Standard Status
Not NASA Endorsed
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
This document establishes the requirements and procedures for the creation and modification of Creo Parametric design software Computer-Aided Design (CAD) models and drawings for use at National Aeronautics and Space Administration (NASA) John C. Stennis Space Center (SSC). The goal is to produce robust models that relate correct dimensional data. This document identifies modeling methodology so that all design groups produce consistent electronic deliverables within SSC.
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
Store Standard Document Locally or Remotely
Store the Actual Standard Document on this server
Important Standard Dates
Revalidated or Reaffirmed Date
Office of Primary Responsibility Designee (OPRD)
OPRD First Name
Thomas
OPRD Last Name
Rich
OPRD Center
SSC
OPRD Organization Code
RA10
OPRD Phone Number
OPRD email address
Thomas.m.rich@nasa.gov
Submitting User
Donna M Rubio
Submitting User's Email
donna.rubio@nasa.gov

Application Notes

-No Application Notes are associated with this standard.

Lessons Learned

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”



-No Lessons Learned are associated with this standard.

DRD Summary Page View

-No DRDs are associated with this standard.