Skip to main content

Control and Instrumentation Cable Testing Standard

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
Administrative/Editorial Changes
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
SSTD-8070-0096-TEST
Version
B-1
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
SSC - Stennis Space Center
Endorsed Standard
Endorsement Details
NASA Core Standard
No
NASA Endorsed Standard Status
Not NASA Endorsed
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
This John C. Stennis Space Center (SSC) standard (SSTD) defines acceptance requirements and test procedures for testing low voltage instrumentation transmission, distribution and control cable for continuity, short circuit and insulation resistance.
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
Store Standard Document Locally or Remotely
Store the Actual Standard Document on this server
Link to Remotely located Standard Document
https://ssctdpub.ssc.nasa.gov/servlet/sm.web.Fetch/SSTD-8070-0096-TEST_Basic.pd…
Important Standard Dates
Next 5-Year Review Date
Office of Primary Responsibility Designee (OPRD)
OPRD First Name
Thomas
OPRD Last Name
Rich
OPRD Center
SSC
OPRD Organization Code
RA10
OPRD Phone Number
(228) 688-3946
OPRD email address
thomas.m.rich@nasa.gov
Submitting User
System Admin
Submitting User's Email
standards@msfc.nasa.gov
Submitted Date

Last modified by:  System Admin
Last modified on:  Fri, 11/27/2020 - 09:25

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.

DRD Related to this Standard

-No DRDs are associated with this standard.