Skip to main content

Bourdon Tube Pressure and Vacuum Gauges for Use in Facility Piping or Tubing Systems

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
Correction
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
SSTD-8070-0094-COMPNTS
Version
A
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
SSC - Stennis Space Center
Endorsed Standard
Endorsement Details
NASA Core Standard
No
NASA Endorsed Standard Status
Not NASA Endorsed
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
This John C. Stennis Space Center (SSC) standard (SSTD) establishes the requirements for bourdon tube type pressure and vacuum gauges that are to be used in facility piping and tubing systems. NOTE: This standard applies to all new bourdon tube type pressure and vacuum gauges and to the necessary replacement of such existing gauges. This SSTD does not necessitate replacement of non-conforming gauges considered in good condition just to meet this SSTD's requirements
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
Store Standard Document Locally or Remotely
Store the Actual Standard Document on this server
Link to Remotely located Standard Document
https://ssctdpub.ssc.nasa.gov/servlet/sm.web.Fetch/SSTD-8070-0094-COMPNTS.pdf?r…
Important Standard Dates
Revalidated or Reaffirmed Date
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.