Skip to main content

NASA Fastener Procurement, Receiving Inspection, and Storage Practices for NASA Mission Hardware

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
Correction
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
NASA-STD-8739.14
Version
Baseline
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
NASA HQ, Office, Facility or Division
NASA HQ Office, Facility or Division
OSMA - Office of Safety and Mission Assurance
Technical Discipline Category
8000 - Safety, Quality, Reliability, Maintainability
Endorsed Standard
Endorsement Details
NASA Endorsement Date
NASA Endorsed Standard Status
NASA Endorsed Standard
Mandatory Standard
NASA Mandatory Standard
NASA Mandatory Standard
Mandatory Standard Requiring Organization
OSMA Mandatory Standard
NASA Mandatory Standard Effective Date
Document Scope
Document Scope
This document establishes minimum requirements for supply chain risk management, procurement, receiving inspection, testing, traceability management, and storage practices for fasteners used in NASA mission hardware. This document does not contain fastener requirements pertaining to design or design analysis; design and design analysis requirements are contained in NASA-STD-5020, Requirements for Threaded Fastening Systems in Spaceflight Hardware.
Keywords
Safety, Quality, Reliability, Maintainability
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
PUBLIC: Upload Publicly Available Standard
nasa-std-873914.pdf (1.02 MB)
Important Standard Dates
Next 5-Year Review Date
Submitting User
Albert T Farrar
Submitting User's Email
albert.t.farrar@nasa.gov
Submitted Date

Last modified by:  Fred McMullen
Last modified on:  Sun, 10/15/2023 - 01:24

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.