Skip to main content

Wind Tunnel Model Systems Criteria

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
New Standard
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
NASA-STD-8719.28
Version
Baseline
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
NASA HQ, Office, Facility or Division
Technical Discipline Category
8000 - Safety, Quality, Reliability, Maintainability
Endorsed Standard
Endorsement Details
Endorsing NASA Organization
OSMA Endorsed Standard
NASA Core Standard
No
NASA Endorsement Date
NASA Endorsed Standard Status
NASA Endorsed Standard
Mandatory Standard
NASA Mandatory Standard
NASA Mandatory Standard
Mandatory Standard Requiring Organization
OSMA Mandatory Standard
NASA Mandatory Standard Effective Date
Document Scope
Document Scope
The purpose of this NASA Technical Standard is to set forth criteria for the design,
analysis, quality assurance, and documentation of wind tunnel model systems to be tested at
various NASA facilities. It is intended to ease the transition of testing of a model system from
one facility to another among the centers. The criteria contained in this standard are intended to prevent model system failure and facility damage.
Keywords
wind tunnel, wind tunnel model systems, design, analysis, quality assurance, QA, documentation, deviation
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
PUBLIC: Upload Publicly Available Standard
NASA-STD-871928-WTMS-Baseline.pdf (2.34 MB)
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.