Skip to main content

ANNEX TO NASA-STD-8719.24 NASA PAYLOAD SAFETY REQUIREMENTS:REQUIREMENTS TABLE

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
Correction
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
NASA-STD-8719.24-ANNEX
Version
B
Change Number
1
Document Date
Change Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
NASA HQ, Office, Facility or Division
NASA HQ Office, Facility or Division
OSMA - Office of Safety and Mission Assurance
Technical Discipline Category
8000 - Safety, Quality, Reliability, Maintainability
Endorsed Standard
Endorsement Details
Endorsing NASA Organization
OSMA Endorsed Standard
NASA Core Standard
No
NASA Endorsement Date
NASA Endorsed Standard Status
NASA Endorsed Standard
Mandatory Standard
NASA Mandatory Standard
NASA Mandatory Standard
Mandatory Standard Requiring Organization
OSMA Mandatory Standard
NASA Mandatory Standard Effective Date
Document Scope
Document Scope
This document contains the template for NASA ELV Payload Safety to meet AFSPCMAN 91-710 requirements. The tailored listing in this ANNEX has been approved by the USAF/30SW and 45SW for use by NASA payloads.
Keywords
Payload Safety ELV Payload
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
PUBLIC: Upload Publicly Available Standard
NASA-STD-871924B-Annex-Change-1_0.pdf (5.15 MB)
PUBLIC: Other Documents Related to this Standard
NASA-STD-871924B-Change-1-Annex-Tailoring-Matrix-Final.xlsx (1.07 MB)
Additional Comments
Annex is available in MS Word and Adobe Reader versions. Additionally, the Requirements table is available in MS Excel.
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.