Skip to main content

ADDITIVE MANUFACTURING REQUIREMENTS FOR SPACEFLIGHT SYSTEMS

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
New Standard
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
NASA-STD-6030
Version
Baseline
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
NASA HQ, Office, Facility or Division
NASA HQ Office, Facility or Division
OCE - Office of the Chief Engineer
Technical Discipline Category
6000 - Materials and Processes, Parts
Endorsed Standard
Endorsement Details
Endorsing NASA Organization
OCE Endorsed Standard
NASA Core Standard
No
NASA Endorsement Date
NASA Endorsed Standard Status
NASA Endorsed Standard
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
This NASA Technical Standard is directed toward additive manufacturing (AM) processes used in the design, fabrication, and testing of space program flight hardware for NASA, including, but not limited to, crewed, non-crewed, robotic, launch vehicle, lander, and spacecraft program/project hardware elements. All crewed spaceflight hardware is covered by the requirements of this document, including vendor-designed, off-the-shelf, and vendor-furnished items. Guidance and recommendations for tailoring this NASA Technical Standard for NASA non-crewed missions, such as robotic missions (spacecraft and launch vehicles), are provided in Appendix B. This NASA Technical Standard is also intended to cover in-space AM operations; however, significant tailoring of these requirements is expected.
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
Store Standard Document Locally or Remotely
Store the Actual Standard Document on this server
PUBLIC: Upload Publicly Available Standard
2021-04-21_nasa-std-6030-approveddocx.pdf (3.16 MB)
Important Standard Dates
Next 5-Year Review Date
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.