Skip to main content

NASA Fastener Procurement, Receiving Inspection, and Storage Practices for Spaceflight Hardware

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
Inactive for New Design
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
NASA-STD-6008
Version
Baseline
Change Number
2
Document Date
Change Date
Inactive for New Design Date
Is Active?
INACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
NASA HQ, Office, Facility or Division
NASA HQ Office, Facility or Division
OCE - Office of the Chief Engineer
Technical Discipline Category
6000 - Materials and Processes, Parts
Endorsed Standard
Endorsement Details
NASA Core Standard
No
NASA Endorsed Standard Status
Not NASA Endorsed
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
This standard establishes fastener procurement, receiving inspection, and storage practices for all fasteners used for spaceflight hardware that are procured, received, tested, inventoried, or installed for space flight by a NASA Center, by a prime contractor, or by any other spaceflight hardware developers.
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
Store Standard Document Locally or Remotely
Store the Actual Standard Document on this server
PUBLIC: Upload Publicly Available Standard
2020-06-05_nasa_std_6008_w-chg_2_inactivate.pdf (546.22 KB)
PUBLIC: Document History for Standard
nasa-std-6008_w-chg_1.pdf (90.42 KB)
Important Standard Dates
Next 5-Year Review Date
Additional Comments
This standard has been transferred to OSMA as the Office of Primary Responsibility.
Superseded by NASA-STD-8739.14
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.