Skip to main content

NASA Standard for Lightning Launch Commit Criteria for Space Flight

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
Revision
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
NASA-STD-4010
Version
A
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
NASA HQ, Office, Facility or Division
NASA HQ Office, Facility or Division
OCE - Office of the Chief Engineer
Technical Discipline Category
4000 - Electrical and Electronics Systems, Avionics/Control Systems, Optics
Endorsed Standard
Endorsement Details
Endorsing NASA Organization
OCE Endorsed Standard
NASA Core Standard
No
NASA Endorsement Date
NASA Endorsed Standard Status
NASA Endorsed Standard
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
This NASA Technical Standard establishes common Lightning Launch Commit Criteria (LLCC) for avoidance of natural and triggered lightning to launch vehicles during ascent that are developed by the LAP for United States space launch.
Keywords
lightning, lightning launch, lightning launch commit criteria
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
PUBLIC: Upload Publicly Available Standard
NASA-STD-4010A-Approved.pdf (597.39 KB)
PUBLIC: Document History for Standard
nasa-std-4010-1.pdf (279.25 KB)
Important Standard Dates
Next 5-Year Review Date
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.