Skip to main content

Moving Mechanical Assemblies for Space and Launch Vehicles

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
New Standard
Organization that Developed the Standard
Organization that Developed the Standard
Non-NASA Standard
Standard Developing Organization
AIAA
Document Identifiers
Document Number
AIAA S-114
Version
Baseline
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
NASA HQ, Office, Facility or Division
NASA HQ Office, Facility or Division
OCE - Office of the Chief Engineer
Technical Discipline Category
5000 - Structures/Mechanical Systems, Fluid Dynamics, Thermal, Propulsion, Aerodynamics
Endorsed Standard
Endorsement Details
Endorsing NASA Organization
OCE Endorsed Standard
NASA Core Standard
No
NASA Endorsement Date
NASA Endorsed Standard Status
NASA Endorsed Standard
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
This standard specifies general requirements for the design, manufacture, quality control, testing, and storage of moving mechanical assemblies (MMAs) to be used on space and launch vehicles. This standard is applicable to the mechanical or electromechanical devices that control the movement of a mechanical part of a space or launch vehicle relative to another part. The requirements apply to the overall MMA as well as to the mechanical components and instrumentation that are an integral part of these mechanical assemblies. When this standard is used to specify general requirements for MMAs to be used on launch vehicles, injection stages, reentry vehicles, or other vehicles, the term "space vehicle" is to be interpreted as the applicable vehicle.
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.