Skip to main content

MSFC Standard For Configurable Logic Device Developments

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
New Standard
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
MSFC-STD-3663
Version
A
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
MSFC - Marshall Space Flight Center
Endorsed Standard
Endorsement Details
NASA Core Standard
No
NASA Endorsed Standard Status
Not NASA Endorsed
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
The intent of this standard is to define requirements to ensure CLD development is managed appropriately, in order to ensure delivery and fielding of robust CLD hardware. A robust device does not contain systematic undesirable features and will respond predictably to various conditions and environments. A reliable device is robust and can demonstrate performance over a period of time based on lifetime (random) failure statistical data.
Keywords
configurable logic devices, reliable device, CLD, CLD development, CLD hardware, programmable logic devices, field programmable gate arrays, application specific integrated circuits, complex electronics, configurable logic device
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
Store Standard Document Locally or Remotely
Store the Actual Standard Document on this server
PUBLIC: Upload Publicly Available Standard
MSFC-STD-3663A.pdf (700.52 KB)
Additional Comments
This standard applies to Configurable Logic Devices (CLDs) to the extent identified in applicable requirements or contractual documentation.
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.