Skip to main content

MSFC Counterfeit Electrical, Electronic, and Electromechanical Parts Avoidance, Detection, Mitigation, and Disposition Requirements for Space Flight and Critical Ground Support Hardware

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
New Standard
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
MSFC-STD-3619
Version
Baseline
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
MSFC - Marshall Space Flight Center
Endorsed Standard
Endorsement Details
NASA Core Standard
No
NASA Endorsed Standard Status
Not NASA Endorsed
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
The scope is to establish a counterfeit parts control document for use by MSFC programs and projects as a method of meeting Requirement 59092 of NPD 8730.2. This document applies to flight hardware, critical ground support equipment (GSE), and critical ground test systems used in Category 1 and Category 2 projects as defined by NPR 7120.5D, NASA Space Flight Program and Project Management Requirements, and/or Class A, B, or C payloads as defined in Appendix A of NPR 8705.4, Risk Classification for NASA Payloads. This document outlines procedures to be employed for risk assessment actions to mitigate the entry of counterfeit EEE parts into the MSFC supply chain.
Keywords
counterfeit parts control, flight hardware, critical ground support equipment, critical ground test systems
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
Store Standard Document Locally or Remotely
Store the Actual Standard Document on this server
PUBLIC: Upload Publicly Available Standard
MSFC-STD-3619.pdf (1.86 MB)
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.