Skip to main content

CASTINGS, ALUMINUM AND MAGNESIUM ALLOY, RADIOGRAPHIC INSPECTION OF, ACCEPTANCE STANDARD FOR - **APPLICATION NOTICE** **MSFC-STD-100 shall not be applied to new programs/projects/activities (PPAs) originated after 04/24/2012. AMS 2175 rev a “Castings,

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
New Standard
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
MSFC-STD-100
Version
Baseline
Change Number
0
Document Date
Is Active?
INACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
MSFC - Marshall Space Flight Center
Endorsed Standard
Endorsement Details
NASA Core Standard
No
NASA Endorsed Standard Status
Not NASA Endorsed
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
Store Standard Document Locally or Remotely
Store the Actual Standard Document on this server
PUBLIC: Upload Publicly Available Standard
MSFC-STD-100.pdf (736 KB)
Additional Comments
MSFC-STD-100 has been canceled based on the following rationale: MSFC-STD-100 shall not be applied to new programs/projects/activities (PPAs) originated after 04/24/2012. AMS 2175 rev a “Castings, Classification and Inspection of” shall be used for new PPAs.
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.