Skip to main content

Flow-Induced Vibration Assessment Requirements for Metal Bellows and Flexhoses

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
New Standard
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
MSFC-SPEC-3746
Version
Baseline
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
MSFC - Marshall Space Flight Center
Endorsed Standard
Endorsement Details
NASA Core Standard
No
NASA Endorsed Standard Status
Not NASA Endorsed
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
This document specifies the requirements for the design and acceptability of all convoluted metal bellows and flexhoses located in both flight and Support Equipment hardware in order to prevent failure from flow-induced vibrations. Flow charts are presented in Figure 3.1-1 and Figure 3.2-1 depicting the process for acceptability.
Keywords
flow-induced vibration assessment, metal bellows and flexhoses
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
Store Standard Document Locally or Remotely
Store the Actual Standard Document on this server
PUBLIC: Upload Publicly Available Standard
msfc-spec-3746.pdf (275.17 KB)
Submitting User
Tammy K Barcala
Submitting User's Email
tammy.k.barcala@nasa.gov
Submitted Date

Last modified by:  Fred McMullen
Last modified on:  Sun, 10/15/2023 - 00:04

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.