Skip to main content

SPECIFICATION FOR SOLVENT, CLEANING, TRANS-1-CHLORO-3,3,3,-TRIFLUOROPROPENE, SOLSTICE® PF

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
Correction
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
MSFC-SPEC-3709
Version
Baseline
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
MSFC - Marshall Space Flight Center
Endorsed Standard
Endorsement Details
NASA Core Standard
No
NASA Endorsed Standard Status
Not NASA Endorsed
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
This specification establishes the requirements for Honeywell Solstice® Performance Fluid (PF) solvent, trans-1-chloro-3,3,3-trifluoropropene. This material is intended for use for cleaning and cleanliness verification for spaceflight hardware and related ground support equipment and test systems.
Keywords
Solvent; Cleaning
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
Store Standard Document Locally or Remotely
Store the Actual Standard Document on this server
PUBLIC: Upload Publicly Available Standard
msfc-spec-3709.pdf (93.74 KB)
Office of Primary Responsibility Designee (OPRD)
OPRD First Name
Mark
OPRD Last Name
Mitchell
OPRD Center
MSFC
OPRD Organization Code
EM22
OPRD Phone Number
(256) 544-5860
OPRD email address
mark.a.mitchell@nasa.gov
Submitting User
Kathy G Huskey
Submitting User's Email
kathy.g.huskey@nasa.gov
Submitted Date

Last modified by:  Kathy G Huskey
Last modified on:  Tue, 08/22/2017 - 11:49

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.

DRD Related to this Standard

-No DRDs are associated with this standard.