Skip to main content

SPECIFICATION RADIOGRAPHIC INSPECTION: SOUNDNESS REQUIREMENTS FOR FUSION WELDS IN ALUMINUM AND MAGNESIUM ALLOY SHEET AND PLATE MATERIAL (SPACE VEHICLE COMPONENTS - **APPLICATION NOTICE** **MSFC-SPEC-259 shall not be applied to new programs/projects/act

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
New Standard
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
MSFC-SPEC-259
Version
A
Change Number
0
Document Date
Is Active?
INACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
MSFC - Marshall Space Flight Center
Endorsed Standard
Endorsement Details
NASA Core Standard
No
NASA Endorsed Standard Status
Not NASA Endorsed
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
Store Standard Document Locally or Remotely
Store the Actual Standard Document on this server
Additional Comments
**APPLICATION NOTICE** **MSFC-SPEC-259 shall not be applied to new programs/projects/activities (PPAs) originated after 04/24/2012. ASTM-E1742 “Standard Practice for Radiographic Examination” shall be used as a guide to general radiography of weld practices along with weld inspection requirements, specific to a PPA, in the form of a weld specification such as MSFC-SPEC-3679 “Process Specification-Welding Aerospace Hardware”. These shall be used for all new PPAs.**
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.