Skip to main content

OUTGASSING TEST FOR MATERIALS ASSOCIATED WITH SENSITIVE SURFACES USED IN AN AMBIENT ENVIRONMENT

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
Revision
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
MSFC-SPEC-2223
Version
B
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
MSFC - Marshall Space Flight Center
Endorsed Standard
Endorsement Details
NASA Core Standard
No
NASA Endorsed Standard Status
Not NASA Endorsed
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
The purpose of this specification is to present the specification for materials that are used in ambient environment at temperatures of 40 degrees Celsius (C) or less and associated with contamination sensitive surfaces. These sensitive surfaces may include but are not limited to optics, windows, thermal “control” or “protective” surfaces. Materials to be tested include but are not limited to bagging materials, tapes, seals, adhesives, nonmetallic containers and covers.
Keywords
control of materials used in air volumes of controlled environments
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
Store Standard Document Locally or Remotely
Store the Actual Standard Document on this server
PUBLIC: Upload Publicly Available Standard
msfc-spec-2223.pdf (76.02 KB)
Office of Primary Responsibility Designee (OPRD)
OPRD First Name
Miria
OPRD Last Name
Finckenor
OPRD Center
MSFC
OPRD Organization Code
EM41
OPRD Phone Number
(256) 544-9244
OPRD email address
miria.finckenor@nasa.gov
Submitting User
System Admin
Submitting User's Email
standards@msfc.nasa.gov
Submitted Date

Application Notes

-No Application Notes are associated with this standard.

Lessons Learned

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.

DRD Summary Page View

-No DRDs are associated with this standard.