Skip to main content

Electrical Bonding Design Guide Handbook

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
New Standard
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
MSFC-HDBK-3697
Version
Baseline
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
MSFC - Marshall Space Flight Center
Endorsed Standard
Endorsement Details
NASA Core Standard
No
NASA Endorsed Standard Status
Not NASA Endorsed
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
This handbook is intended as an aid to the mechanical designer in implementing electrical bonding requirements when designing space vehicles or equipment that will fly on space vehicles.
Keywords
electrical bonding, space vehicles, bonding design, bonding requirements, bonding classifications
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
Store Standard Document Locally or Remotely
Store the Actual Standard Document on this server
PUBLIC: Upload Publicly Available Standard
MSFC-HDBK-3697.pdf (1.5 MB)
Additional Comments
It is important that the designer knows and understands the requirements and is able to clearly communicate to the Manufacturing organization what needs to be done. The designer does not need to dictate how to perform the electrical bonding tasks, but should have an understanding of what the task entails. If there are options in how the task is performed and there is a preferred way, then the preference should be noted on the design.
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.