Skip to main content

FIRE PROTECTION DESIGN, STANDARD FOR

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
No
SUNS Notification Type
Correction
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
KSC-STD-F-0004
Version
G
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
KSC - Kennedy Space Center
Endorsed Standard
Endorsement Details
Endorsing NASA Organization
OCE Endorsed Standard
NASA Core Standard
No
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
This document provides additional fire protection design requirements to be applied in conjunction with NASA-STD-8719.11, Safety Standard for Fire Protection, for the design or modification of facilities and systems under the jurisdiction of KSC, NASA. This document focuses on KSC-specific design requirements related to fire alarm and fire suppression systems that are a direct result of best practices and lessons learned, primarily relying on applicable codes and standards referenced in NASA-STD-8719.11 for other aspects of fire protection design. Where this design extends beyond facilities at KSC (Cape Canaveral Air Force Station, Vandenberg Air Force Base, etc.), local requirements (e.g. local fire alarm reporting methods) and the requirements of local Authorities Having Jurisdiction (AHJ) shall apply.
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
PUBLIC: Upload Publicly Available Standard
ksc-std-f-0004_g.pdf (3.55 MB)
PUBLIC: Document History for Standard
KSC-STD-F-0004F.pdf (8.2 MB)
KSC-STD-F-0004E.pdf (2.8 MB)
KSC-STD-F-0004D.pdf (3.23 MB)
KSC-STD-F-0004C.pdf (2.4 MB)
KSC-STD-F-0004B.pdf (4.27 MB)
KSC-STD-F-0004A.pdf (9.38 MB)
KSN-STD-F-0004.pdf (9.48 MB)
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.