Skip to main content

ENVIRONMENTAL TEST METHODS FOR GROUND SUPPORT EQUIPMENT, STANDARD FOR

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
Revision
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
KSC-STD-164
Version
C
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
KSC - Kennedy Space Center
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
This standard establishes test methods for determining the capability of ground support equipment (GSE) and other facility hardware to function when exposed to the natural and induced environments peculiar to the prelaunch and launch conditions at KSC. The test methods contained herein specify conditions obtainable in the laboratory that will give test results similar to actual service conditions. This standard provides requirements and guidelines for the preparation of detailed test procedures and for the preparation of the environmental test portions of design specifications. This standard provides the environmental test methods that are applicable for qualification of components in accordance with KSC-STD-G-0003, Launch Support and Facility Components, Qualification of, Standard for.
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
PUBLIC: Upload Publicly Available Standard
KSC-STD-164_RevC-Final.pdf (740.19 KB)
PUBLIC: Document History for Standard
ksc-std-164b.pdf (3.38 MB)
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.