Skip to main content

TUBING, STEEL, CORROSION RESISTANT, TYPES 304 AND 316, SEAMLESS, ANNEALED, SPECIFICATION FOR

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
No
SUNS Notification Type
Correction
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
KSC-SPEC-Z-0007
Version
G
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
KSC - Kennedy Space Center
Endorsed Standard
Endorsement Details
Endorsing NASA Organization
OCE Endorsed Standard
NASA Core Standard
No
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
TUBING, STEEL, CORROSION RESISTANT, TYPES 304 AND 316, SEAMLESS, ANNEALED, SPECIFICATION FOR
This specification defines the requirements for pressure tubing suitable for use with standard, 37-degree, flared tube fittings and buttwelding tube fittings in ground support equipment fluid systems at the John F. Kennedy Space Center (KSC), NASA.
These procurement requirements are extracted from KSC-DE-512-SM. Tubing system design and application details for the use of this tubing in Ground Systems shall be in accordance with KSC-DE-512-SM.
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
PUBLIC: Upload Publicly Available Standard
KSC-SPEC-Z-0007-REV-G.pdf (219.35 KB)
PUBLIC: Document History for Standard
ksc-spec-z-0007e.pdf (466.47 KB)
KSC-SPEC-Z-0007-REV-F-NOC.pdf (83.24 KB)
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.