Skip to main content

Tubing, Superaustenitic Steel, Corrosion Resistant, UNS N08367 and UNS S31254, Bright Annealed, Passivated, Specification for

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
Revision
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
KSC-SPEC-P-0027
Version
A
Change Number
1
Document Date
Change Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
KSC - Kennedy Space Center
Endorsed Standard
Endorsement Details
NASA Core Standard
No
NASA Endorsed Standard Status
Not NASA Endorsed
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
This specification defines the requirements for pressure tubing suitable for use with standard, 37-degree, flared tube fittings and buttwelding tube fittings in ground support equipment fluid systems at the John F. Kennedy Space Center (KSC), NASA. Tubing system design and application details for the use of this tubing in Ground Systems shall be in accordance with KSC-DE-512-SM
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
PUBLIC: Upload Publicly Available Standard
KSC-SPEC-P-0027_RevA_Final.pdf (338.98 KB)
PUBLIC: Document History for Standard
KSC-SPEC-P-0027-Chg-1.pdf (338.95 KB)
KSC-SPEC-P-0027.pdf (581.54 KB)
Office of Primary Responsibility Designee (OPRD)
OPRD First Name
Steve
OPRD Last Name
Anthony
OPRD Center
KSC
OPRD Organization Code
NE
OPRD Phone Number
321.867.8433
OPRD email address
stephen.m.anthony@nasa.gov
Submitting User
System Admin
Submitting User's Email
standards@msfc.nasa.gov
Submitted Date

Last modified by:  Dorothy Notarnicola
Last modified on:  Thu, 06/22/2023 - 08:36

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.

DRD Related to this Standard

-No DRDs are associated with this standard.