Skip to main content

SENSORS, TRANSDUCERS AND SIGNAL CONDITIONING SYSTEMS SELECTION PROCESS

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
No
SUNS Notification Type
Correction
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
KSC-NE-9187
Version
A
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
KSC - Kennedy Space Center
Endorsed Standard
Endorsement Details
Endorsing NASA Organization
OCE Endorsed Standard
NASA Core Standard
No
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
This document's scope is limited to measurements being utilized at KSC in GSE. This set of guidelines has been developed by the NASA KSC Testing and Design Branch of the Engineering Directorate. It is intended to provide a consolidated and consistent approach for the selection of measurements. It is also intended to provide a listing of recommended equipment requirements and their definitions and usage to aide in the development of GSE for subsystems at KSC.
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
PUBLIC: Upload Publicly Available Standard
KSC-NE-9187_RevA_Final.pdf (571.25 KB)
PUBLIC: Document History for Standard
KSC-NE-9187BASELINE.pdf (3.72 MB)
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.