Skip to main content

ENGINEERING DRAWING PRACTICES. VOLUME 1: AEROSPACE AND GROUND SUPPORT EQUIPMENT

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
Revision
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
KSC-GP-435, VOLUME 1
Version
H
Volume Number
1
Change Number
1
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
KSC - Kennedy Space Center
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
The Kennedy Space Center (KSC) Engineering Drawing Practices, Volume I of II, Aerospace and Ground Support Equipment is the official source for the requirements and
interpretations to be used in the development and presentation of engineering drawings and related documentation for the KSC.
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
PUBLIC: Upload Publicly Available Standard
GP-435-Vol-I-Chg-H-1.pdf (717.1 KB)
PUBLIC: Document History for Standard
KSC-GP-435-VOL-1-REV-H.pdf (602.51 KB)
Office of Primary Responsibility Designee (OPRD)
OPRD First Name
Patrick
OPRD Last Name
Simpkins
OPRD Center
KSC
OPRD Organization Code
NE
OPRD Phone Number
(321) 867-7770
OPRD email address
patrick.a.simpkins@nasa.gov
Submitting User
System Admin
Submitting User's Email
standards@msfc.nasa.gov
Submitted Date

Application Notes

-No Application Notes are associated with this standard.

Lessons Learned

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.

DRD Summary Page View

-No DRDs are associated with this standard.