Skip to main content

Process Specification for Eddy Current Inspection

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
New Standard
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
PRC-6509
Version
D
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
JSC - Johnson Space Center
Endorsed Standard
Endorsement Details
NASA Core Standard
No
NASA Endorsed Standard Status
Not NASA Endorsed
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
This process specification establishes the minimum requirements for eddy current inspection of flat surfaces, fastener holes, threaded fasteners and seamless and welded tubular products made from nonmagnetic alloys such as aluminum and stainless steel.
Keywords
Eddy Current Inspections, Spacecraft, Aerospace
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
Store Standard Document Locally or Remotely
Store the Actual Standard Document on this server
PUBLIC: Upload Publicly Available Standard
PRC-6509D.pdf (111.99 KB)
Office of Primary Responsibility Designee (OPRD)
OPRD First Name
Ajay
OPRD Last Name
Koshti
OPRD Center
JSC
OPRD Organization Code
ES
OPRD Phone Number
(281) 483-0262
OPRD email address
ayay.koshti-1@nasa.gov
Additional Comments
Authorized for public release via JSC DAA 34649.
Submitting User
Terri Lee English
Submitting User's Email
terri.l.english@nasa.gov
Submitted Date

Application Notes

-No Application Notes are associated with this standard.

Lessons Learned

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.

DRD Summary Page View

-No DRDs are associated with this standard.