Skip to main content

Guide for Qualification of Nondestructive Evaluation Procedures

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
New Standard
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
JSC-67203
Version
Baseline
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
JSC - Johnson Space Center
Endorsed Standard
Endorsement Details
NASA Core Standard
No
NASA Endorsed Standard Status
Not NASA Endorsed
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
This document provides guidelines for qualification of NDE procedures by demonstration. The qualification provides minimum requirements for some NDE procedures that meet conditions stated within. The qualification covers those applications where NDE flaw detectability is given as a flaw size. The document is intended comply with NASA-STD-5009 guidelines. It also provides guidelines for NDE procedure qualification methods not covered in NASA-STD-5009 and appropriate approval is required before using these approaches. The guide is not intended to cover qualification of every kind of NDE procedure.
Keywords
POD, NDE,
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
Store Standard Document Locally or Remotely
Store the Actual Standard Document on this server
PUBLIC: Upload Publicly Available Standard
jsc-67203_nde_qualification_guide_basic.pdf (1.01 MB)
Important Standard Dates
Next 5-Year Review Date
Additional Comments
Released to the public via the NASA JSC Scientific and Technical Information (STI) Process DAA 59601
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.