Skip to main content

Damage Threat Assessment (DT A) and Damage Control Plan (DCP) Template for Composite Overwrapped Pressure Vessels

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
No
SUNS Notification Type
Administrative/Editorial Changes
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
JSC-66901
Version
Basic
Change Number
0
Document Date
Change Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
JSC - Johnson Space Center
Endorsed Standard
Endorsement Details
NASA Core Standard
No
NASA Endorsed Standard Status
Not NASA Endorsed
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
This Damage Control Plan (DCP) template is used to evaluate and mitigate defined threats to Composite Overwrapped Pressure Vessel (COPV) [P/N XXX] to be used in [payload/hardware/program name]. This plan defines the damage threats to a COPV during manufacturing, handling, test, storage, transportation, in-service use and maintenance, including integration, launch, re-entry, landing and re-flight, as applicable, the steps taken to mitigate the possibility of damage due to these threats and the identification of visual inspection points.
Keywords
Damage Control Plan, Overwrapped Pressure Vessels, Template, Hardware, Payload
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
PUBLIC: Upload Publicly Available Standard
jsc-66901_unrestricted_cover.pdf (3.71 MB)
Important Standard Dates
Next 5-Year Review Date
Additional Comments
JSC-66901 posted as Suitable for Internal NASA Release as per JSC JF1172 Control Number 4022. Cover updated to Unrestricted as per JSC DAA TN#61452 approved on 11/29/2018.
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.