Skip to main content

Electrostatic Discharge Control Requirements for the Protection of Electronic Components and Assemblies

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
Retired
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
JSC-66552
Version
Baseline
Change Number
0
Document Date
Is Active?
INACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
JSC - Johnson Space Center
Endorsed Standard
Endorsement Details
NASA Core Standard
No
NASA Endorsed Standard Status
Not NASA Endorsed
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
This document defines the process, roles, responsibilities, and technical requirements for ESD control. Based on the requirements and guidelines found in this document, the responsible party for each facility or laboratory shall identify each ESD control work area. The responsible parties shall then develop an ESD Control Plan for each work area. This document provides guidance on how to comply with NASA Policy Directive 8730.5 (NPD-8730.5) that imposes ESD standard ANSI/ESD S20.20-2007.
Keywords
Electrostatic Discharge Control (ESD),Protection of Electronic Components and Assemblies
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
Store Standard Document Locally or Remotely
Store the Actual Standard Document on this server
PUBLIC: Upload Publicly Available Standard
JSC-66552BASELINE.pdf (864.33 KB)
Important Standard Dates
Revalidated or Reaffirmed Date
Cancelled Date
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.