Skip to main content

Cuprous Oxide Wiring Contamination (Red Plague) Control Plan

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
New Standard
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
GSFC-STD-8011
Version
Baseline
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
GSFC - Goddard Space Flight Center
Endorsed Standard
Endorsement Details
NASA Core Standard
No
NASA Endorsed Standard Status
Not NASA Endorsed
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
This standard prescribes the minimum requirements for the control of cuprous oxide corrosion
(Red Plague) for silver coated copper wires, cables, and harness assemblies. The purpose of this standard is to address operations where assembly processes, environmental conditions and contamination may promote the development of Red Plague in silver coated copper wires, cables, and harness assemblies.
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
PUBLIC: Upload Publicly Available Standard
GSFC-STD-8011_Approved.pdf (993.03 KB)
Important Standard Dates
Next 5-Year Review Date
Submitting User
Laura Elizabeth Personale
Submitting User's Email
laura.e.personale@nasa.gov
Submitted Date

Last modified by:  Laura Elizabeth Personale
Last modified on:  Wed, 07/24/2024 - 12:32



 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.