Skip to main content

CERTIFICATION GUIDELINES FOR CREWED INFLATABLE SOFTGOODS STRUCTURES

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
No
SUNS Notification Type
Administrative/Editorial Changes
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
JSC-67721
Version
A
Change Number
0
Document Date
Change Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
JSC - Johnson Space Center
Endorsed Standard
Endorsement Details
NASA Core Standard
No
NASA Endorsed Standard Status
Not NASA Endorsed
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
This document provides guidance in the critical areas used in the assessment of an inflatable
design, its materials, and component, sub-component, and module testing. Guidance is also
provided on the instrumentation and analysis that support the development and evaluation of
crewed softgoods space structure certification. This document is intended to be broadly applicable
to any habitable softgoods structure, but due to the breadth of possible architectures,
supplementary testing or data may be necessary to support a specific mission application and/or
environment. Due to the current lack of long-term flight data for softgoods inflatables used as
primary structure on a crewed spacecraft, this document is expected to be updated periodically
with new information and revised recommendations as experience is gained through use of these
structures in service.
Keywords
Softgoods
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
PUBLIC: Upload Publicly Available Standard
JSC-67721_CGCISS_RevA_Final.pdf (727.61 KB)
Important Standard Dates
Next 5-Year Review Date
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.