Skip to main content

Wallops Flight Facility Range Safety Manual

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
Yes
SUNS Notification Type
Administrative/Editorial Changes
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
GSFC-STD-8009
Version
Baseline
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
GSFC - Goddard Space Flight Center
Endorsed Standard
Endorsement Details
NASA Core Standard
No
NASA Endorsed Standard Status
Not NASA Endorsed
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
The purpose of this standard is to identify WFF range requirements to implement safety policies and criteria defined in NPR 8715.5, Range Flight Safety Program, NASA-STD-8719.25 Range Flight Safety Requirements, and sections of NPR 8715.3, NASA General Safety Program Requirements applicable to range safety. The standard defines the technical design requirements, restrictions, operations procedures, and other support requirements. It identifies data requirements and general schedule requirements for WFF to perform appropriate safety analysis per 800-PG-8715.5.1, Range Safety Process for Programs and Projects.

Safety participation early in the planning stages of a program will reduce the possibility of costly engineering changes.
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
PUBLIC: Upload Publicly Available Standard
GSFC-STD-8009_Adm-Ext.pdf (6.75 MB)
Important Standard Dates
Next 5-Year Review Date
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.