Skip to main content

Electrical, Electronic, Electromechanical (EEE) Parts Management and Control Requirements for MSFC Space Flight Hardware

Options for Standards Update Notification System (SUNS)
Send SUNS Updates
No
SUNS Notification Type
Correction
Organization that Developed the Standard
Organization that Developed the Standard
NASA Standard
Document Identifiers
Document Number
MSFC-STD-3012
Version
A
Change Number
0
Document Date
Is Active?
ACTIVE
NASA Organization and Technical Discipline
Responsible NASA Organization
MSFC - Marshall Space Flight Center
Endorsed Standard
Endorsement Details
NASA Core Standard
No
NASA Endorsed Standard Status
Not NASA Endorsed
Mandatory Standard
NASA Mandatory Standard
Not a NASA Mandatory Standard
Document Scope
Document Scope
This Standard sets forth the selection, testing, and application requirements that each Project Manager shall use (tailor) to manage and control the electrical, electronic, and electromechanical (EEE) parts activities for MSFC space flight and mission essential ground support equipment in accordance with NPD 8730.2.
Keywords
electrical parts, electronic parts, electromechanical parts, mission essential ground support equipment, EEE parts, parts derating
Document Access Control
Document Viewable by
Export Control/Distribution Authorization
Internet Public -- Standard is cleared for public accessibility on the internet.
PUBLIC: Upload Publicly Available Standard
MSFC-STD-3012.pdf (1.33 MB)
Additional Comments
Some sections of this EEE parts document were based on the defunct MIL-STD-975M parts document. (EEE is electrical, electronic and electromechanical.)
Submitted Date

 

Application Notes for this Standard

-No Application Notes are associated with this standard.

Lessons Learned Related to this Standard

To associate Lessons Learned to a specific standard, find the related lesson in LLIS. These lessons have been vetted and approved via the lessons learned process. Then, click “Create a new “Lessons Learned” record for this Standard” and complete the information.

If you have a lesson learned that is not in LLIS, click “Proceed to the NASA Engineering Network to create a new “Lesson Learned” about this Standard” to be vetted and approved in that process. Then, associate the lesson by clicking “Create a new “Lessons Learned” record for this Standard.”


-No Lessons Learned are associated with this standard.