| Document Number |
Revision |
Title |
| KSC-DF-107 |
D |
TECHNICAL DOCUMENTATION STYLE GUIDE |
| KSC-E-165 |
E |
ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR |
| KSC-E-166 |
C |
ELECTRICAL GROUND SUPPORT EQUIPMENT, INSTALLATION AND ASSEMBLY, SPECIFICATION FOR |
| KSC-F-124 |
E |
FITTINGS, FLARED TUBE, SPECIFICATION FOR |
| KSC-GP-425 |
G |
FLUID FITTING ENGINEERING STANDARDS |
| KSC-GP-435 |
B, Change 3 |
ENGINEERING DRAWING PRACTICES. VOLUME 2: FACILITIES (INCLUDES CHANGES 1-3, CHANGE 3 DATED 7/2/1999) |
| KSC-GP-435, VOLUME 1 |
F, Change 2 |
ENGINEERING DRAWING PRACTICES. VOLUME 1: AEROSPACE AND GROUND SUPPORT EQUIPMENT |
| KSC-S-126 |
B |
SEALING OF ELECTRICAL COMPONENTS, SPECIFICATION FOR |
| KSC-SO-S-9 |
J |
COMPRESSED GAS TRAILERS, RETEST AND REFURBISHMENT OF, SPECIFICATION FOR |
| KSC-SPEC-E-0012 |
Baseline |
HEAT AND BLAST PROTECTION COATING MATERIALS FOR ELECTRICAL CABLES, SPECIFICATION FOR |
| KSC-SPEC-E-0017 |
C |
ELECTRICAL POWER CABLES, INSTALLATION OF, SPECIFICATION FOR |
| KSC-SPEC-E-0018 |
B |
AC POWER WIRE, GENERAL PURPOSE, SINGLE CONDUCTOR, 600 VOLT, 60 HERTZ, PROCUREMENT OF, SPECIFICATION FOR |
| KSC-SPEC-E-0019 |
B |
AC POWER CABLE, GENERAL PURPOSE, MULTI-CONDUCTOR, 600 VOLT, 60 HERTZ, PROCUREMENT OF, SPECIFICATION FOR |
| KSC-SPEC-E-0020 |
C |
AC POWER CABLE, MINERAL INSULATED, 600 VOLT, 60 HERTZ, PROCUREMENT OF, SPECIFICATION FOR |
| KSC-SPEC-E-0021 |
B |
AC POWER CABLE, INTERLOCKED ARMORED, 600 VOLT, 60 HERTZ, PROCUREMENT OF, SPECIFICATION FOR |
| KSC-SPEC-E-0022 |
B |
AC POWER CABLE, 5,000 VOLT, 60 HERTZ, PROCUREMENT OF, SPECIFICATION FOR |
| KSC-SPEC-E-0023 |
C |
AC POWER CABLE, 15,000 VOLT, 60 HERTZ, PROCUREMENT OF, SPECIFICATION FOR |
| KSC-SPEC-E-0024 |
A |
CABLE, ELECTRICAL, SHIELDED, JACKETED FOR HARNESS ASSEMBLIES, GENERAL SPECIFICATION FOR |
| KSC-SPEC-E-0029 |
BASELINE |
COMPOUND, POTTING AND MOLDING, ELASTOMERIC, SPECIFICATION FOR |
| KSC-SPEC-E-0031 |
B |
CABLES, ELECTRICAL, SPECIFICATION FOR (SUPERSEDES MSFC-SPEC-332E) |
| KSC-SPEC-F-0006 |
B |
HEAT AND BLAST PROTECTION COATING MATERIALS, SPECIFICATION FOR |
| KSC-SPEC-F-0009 |
A |
SIGNS AT JFK SPACE CENTER, DESIGN, FABRICATION AND ERECTION OF |
| KSC-SPEC-G-0002 |
B |
COMPILING CONSTRUCTION COST ESTIMATES |
| KSC-SPEC-G-0003 |
BASELINE |
GROUND SUPPORT EQUIPMENT COST ESTIMATING |
| KSC-SPEC-P-0012 |
BASELINE |
REFRACTORY CONCRETE, SPECIFICATION FOR |
| KSC-SPEC-P-0014 |
A |
GARMENTS USED IN NON-CLEANROOM ENVIRONMENTS FOR HAZARDOUS OPERATIONS, MINIMUM REQUIREMENTS FOR, SPECIFICATION FOR |
| KSC-SPEC-P-0015 |
B |
GARMENTS USED IN CLEANROOM ENVIRONMENTS FOR HAZARDOUS OPERATIONS, MINIMUM REQUIREMENTS FOR, SPECIFICATION FOR |
| KSC-SPEC-P-0016 |
A |
MINIMUM REQUIREMENTS FOR GARMENT SNAP FASTENER, SPECIFICATION FOR |
| KSC-SPEC-P-0017 |
BASELINE |
PROPELLANTS, RECOVERED HYDRAZINE FAMILY FUELS, SPECIFICATION FOR |
| KSC-SPEC-P-0018 |
BASELINE |
PROPELLANTS, RECOVERED NITROGEN TETROXIDE SOLUTION, SPECIFICATION FOR |
| KSC-SPEC-P-0019 |
BASELINE |
SOLVENT, CLEANING, 1,1,1,2,3,4,4,5,5,5-DECAFLUOROPENTANE (62 WT%) AND TRANS-1,2-DICHLOROETHYLENE (38 WT%), VERTREL MCA TM, SPECIFICATION FOR |
| KSC-SPEC-P-0020 |
BASELINE |
SOLVENT, CLEANING, 3,3-DICHLORO-1,1,1,2,2-PENTAFLUOROPROPANE (45+5 WT%) AND 1,3-DICHLORO-1,1,2,2,3-PENTAFLUOROPROPANE (55+5 WT%) HCFC-225, SPECIFICATION FOR |
| KSC-SPEC-P-0021 |
BASELINE |
SOLVENT, CLEANING, 1,1,1,2,3,4,4,5,5,5-DECAFLUOROPENTANE, SPECIFICATION FOR |
| KSC-SPEC-P-0022 |
BASELINE |
SOLVENT, CLEANING, 1,3-DICHLORO-1,1,2,2,3-PENTAFLUOROPROPANE, HCFC-225G, SPECIFICATION FOR |
| KSC-SPEC-P-0024 |
BASELINE |
REFRIGERANT, HCFC-124, 2-CHLORO-1,1,1,2-TETRAFLUOROETHANE, SPECIFICATION FOR |
| KSC-SPEC-P-0025 |
BASELINE |
PROPYLENE GLYCOL MONOMETHYL ETHER (PGME) 1-METHOXY-2-PROPANOL, SPECIFICATION FOR |
| KSC-SPEC-P-0026 |
BASELINE |
PROPELLANTS, RECOVERED HALON-1301, SPECIFICATION FOR |
| KSC-SPEC-Z-0001 |
A |
PIPE, 36% NICKEL, IRON-BASE (INVAR 36), SPECIFICATION FOR |
| KSC-SPEC-Z-0005 |
A |
BRAZING-STEEL, COPPER, ALUMINUM, NICKEL, AND MAGNESIUM ALLOYS, SPECIFICATION FOR |
| KSC-SPEC-Z-0006 |
A |
INDUCTION BRAZING, AEROSPACE TUBING FITTINGS, SPECIFICATION FOR |
| KSC-SPEC-Z-0007 |
E |
TUBING, STEEL, CORROSION RESISTANT, TYPES 304 AND 316, SEAMLESS, ANNEALED, SPECIFICATION FOR |
| KSC-SPEC-Z-0011 |
A |
SILICONE RUBBER ABLATIVE MATERIAL TO GROUND SUPPORT EQUIPMENT, APPLICATION OF, SPECIFICATION FOR |
| KSC-SPEC-Z-0013 |
BASELINE |
PENETRANT, MAGNETIC PARTICLE AND ULTRASONIC INSPECTION, REQUIREMENTS FOR, SPECIFICATION FOR |
| KSC-SPEC-Z-0019 |
E |
AGE CONTROL OF ELASTOMERIC PARTS, SPECIFICATION FOR |
| KSC-STD-132 |
D |
POTTING AND MOLDING ELECTRICAL CABLE ASSEMBLY TERMINATIONS, STANDARD FOR |
| KSC-STD-141 |
A |
LOAD TEST IDENTIFICATION AND DATA MARKING, STANDARD FOR |
| KSC-STD-152-1 |
C |
GRAPHICAL SYMBOLS FOR DRAWINGS. PART 1: FACILITIES, STANDARD FOR |
| KSC-STD-152-2 |
C |
GRAPHIC SYMBOLS FOR DRAWINGS. PART 2: GROUND SUPPORT EQUIPMENT, STANDARD FOR |
| KSC-STD-164 |
B |
ENVIRONMENTAL TEST METHODS FOR GROUND SUPPORT EQUIPMENT, STANDARD FOR |
| KSC-STD-6 |
D |
CARD HOLDER ATTACHMENTS AND ROOM NUMBERS, STANDARD FOR |
| KSC-STD-E-0001 |
C |
DESIGN OF ELECTRICAL CONTROL AND MONITORING SYSTEMS, EQUIPMENT (GSE), AND PANELS, STANDARD FOR |
| KSC-STD-E-0002 |
D |
HAZARD PROOFING OF ELECTRICALLY ENERGIZED EQUIPMENT, STANDARD FOR |
| KSC-STD-E-0004 |
B |
PNEUMATIC AND HYDRAULIC MECHANICAL COMPONENTS, ELECTRICAL DESIGN, STANDARD FOR |
| KSC-STD-E-0006 |
B |
INSTRUMENTATION AND COMMUNICATIONS CABLE APPLICATIONS, STANDARD FOR |
| KSC-STD-E-0009 |
B |
CABLE NUMBERING, OUTSIDE PLANT COMMUNICATION SYSTEM, STANDARD FOR |
| KSC-STD-E-0010 |
A |
SOLDERING OF ELECTRICAL CONNECTIONS, (HAND OR MACHINE), STANDARD FOR |
| KSC-STD-E-0011 |
G |
ELECTRICAL POWER RECEPTACLES AND PLUGS, STANDARD FOR |
| KSC-STD-E-0012 |
E |
FACILITY GROUNDING AND LIGHTNING PROTECTION, STANDARD FOR (TITLE CHANGED FROM BONDING AND GROUNDING, STANDARD FOR, BY REVISION D, 6/7/2000) |
| KSC-STD-E-0014 |
B |
WIRE AND CABLE APPLICATIONS, STANDARD FOR |
| KSC-STD-E-0015 |
B, Change 1 |
MARKING OF GROUND SUPPORT EQUIPMENT, STANDARD FOR |
| KSC-STD-E-0021 |
BASELINE |
TELECOMMUNICATION PREMISES DISTRIBUTION SYSTEMS, DESIGN OF, STANDARD FOR (KSC) |
| KSC-STD-F-0004 |
E |
FIRE PROTECTION DESIGN, STANDARD FOR |
| KSC-STD-F-0004 |
E |
FIRE PROTECTION DESIGN, STANDARD FOR |
| KSC-STD-G-0003 |
B |
LAUNCH SUPPORT AND FACILITY COMPONENTS, QUALIFICATION OF, STANDARD FOR |
| KSC-STD-P-0001 |
B |
EQUIPMENT OF SYSTEM PROCUREMENT/PERFORMANCE SPECIFICATIONS, PREPARATION OF, STANDARD FOR |
| KSC-STD-P-0002 |
A |
COMPONENT PROCUREMENT/PERFORMANCE SPECIFICATIONS, PREPARATION OF, STANDARD FOR |
| KSC-STD-P-0006 |
BASELINE |
QUICK RELEASE PINS AND PIN TETHERS, STANDARD FOR |
| KSC-STD-P-0007 |
BASELINE |
NETBIOS NAMING FOR NETWORKS CENTER DOMAIN, WORKGROUP, WORKSTATION, AND USER REGISTRATION, STANDARD FOR |
| KSC-STD-SF-0004 |
B |
GROUND PIPING SYSTEMS COLOR CODING AND IDENTIFICATION, SAFETY STANDARD FOR |
| KSC-STD-Z-0006 |
B |
HYPERGOLIC PROPELLANTS GROUND SUPPORT EQUIPMENT, DESIGN OF, STANDARD FOR |
| KSC-STD-Z-0007 |
BASELINE |
HYDROCARBON FUEL GROUND SUPPORT EQUIPMENT, DESIGN OF, STANDARD FOR |
| KSC-STD-Z-0008 |
C |
GROUND LIFE SUPPORT SYSTEMS AND EQUIPMENT, DESIGN OF, STANDARD FOR |
| KSC-STD-Z-0009 |
C |
CRYOGENIC GROUND SUPPORT EQUIPMENT, DESIGN OF, STANDARD FOR |
| KSC-STD-Z-0010 |
A |
ENVIRONMENTAL CONTROL SYSTEMS, GROUND COOLANT SYSTEMS, COOLANT SERVICING SYSTEMS AND GROUND SUPPORT EQUIPMENT, DESIGN OF, STANDARD FOR |
| KSC-STD-Z-0012 |
B |
FLAME DEFLECTOR DESIGN, STANDARD FOR |
| KSC-STD-Z-0013 |
BASELINE |
POTABLE WATER CROSS-CONNECTION CONTROL DESIGN FOR FACILITIES, STANDARD FOR |
| KSC-W-167 |
B |
WIRING PROGRAMMING SYSTEM PATCHBOARDS, SPECIFICATION FOR |
